Dr Geoffrey Turvey

Senior Lecturer

Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G.J., Assassa, J. 5/09/2017
Conference paper

Thermo-mechanically loaded GFRP single-bolt single-lap joints
Turvey, G.J., Szulik, M. 26/05/2017 In: Proceedings of the ICE - Structures and Buildings.
Journal article

Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing
Sotayo, A., Green, S.M., Turvey, G.J. 15/12/2016 In: Composite Structures. 158, p. 44-55. 12 p.
Journal article

CFRP stiffened GFRP continuous beams – a simple closed-form analysis and its experimental verification for serviceability limit deformations
Turvey, G.J. 1/10/2016 In: Composite Structures. 153, p. 952-960. 9 p.
Journal article

Pultruded GFRP double-lap single-bolt tension joints - temperature effects on mean and characteristic failure stresses and knock-down factors
Turvey, G.J., Sana, A. 1/10/2016 In: Composite Structures. 153, p. 624-631. 8 p.
Journal article

Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials
Sotayo, A., Green, S.M., Turvey, G.J. 11/07/2016 In: Mechcomp2 2nd International Conference on Mechanics of Composites . Bologna : Editrice Esculapio ISBN: 9788874889631.
Conference contribution

Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state
Turvey, G.J. 1/05/2016 In: Composite Structures. 141, p. 213-220. 8 p.
Journal article

Experimental investigation of recycled carpet composites for barrier structures
Sotayo, A., Green, S.M., Turvey, G.J. 04/2016
Conference paper

Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers
Turvey, G.J. 1/12/2015 In: Composite Structures. 133, p. 659-669. 11 p.
Journal article

Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams
Turvey, G., Cerutti, X. 1/11/2015 In: Composite Structures. 131, p. 490-500. 11 p.
Journal article

Carpet recycling: a review of recycled carpets for structural composites
Sotayo, A., Green, S., Turvey, G. 04/2015 In: Environmental Technology and Innovation. 3, p. 97-107. 11 p.
Journal article

Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution
Turvey, G. 04/2015 In: Composite Structures. 122, p. 352-360. 9 p.
Journal article

Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G., Cerutti, X. 01/2015 In: Composite Structures. 119, 1, p. 543-550. 8 p.
Journal article

Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G.J. 2015 In: Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232. 6 p.
Paper

Developing novel structural composites from recycled materials
Sotayo, A., Green, S., Turvey, G. 16/12/2014
Poster

Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams
Turvey, G. 05/2014 In: Composite Structures. 111, p. 426-435. 10 p.
Journal article

An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G. 2014 In: Proceedings of the International Conference, FRP Bridges 2014.
Conference contribution

Single- and double-lap bolted joints in pultruded composite plate
Turvey, G. 2014
Conference paper

Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G. 2013 In: Advanced Composites in Civil Engineering. Woodhead Publishing Limited p. 440-508. 69 p.
Chapter (peer-reviewed)

Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G. 2013 In: Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367. 11 p.
Conference contribution

A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G., Erfani Moghadam, A. 10/2012 In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242. 12 p.
Journal article

An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G., Gode, J. 13/09/2012
Conference paper

Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G. 13/06/2012
Conference paper

Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate
Turvey, G.J. 10/2011 In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319. 13 p.
Journal article

Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G.J. 10/2011 In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344. 12 p.
Journal article

Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G. 6/09/2011
Conference paper

Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G. 2011 In: Composite joints and connections: principles, modelling and testing. Cambridge : Woodhead Publishing Limited p. 77-111. 35 p. ISBN: 978-1-845569-990-1. Electronic ISBN: 978-0-85709-492-6.
Chapter

Cross-stiffened circular plates: an elasto-plastic large deflection analysis
Turvey, G. 14/09/2010
Conference paper

Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G. 7/09/2010
Conference paper

An experimental investigation of bolt pull-through in pultruded GRP plate
Turvey, G. 1/09/2009
Conference paper

Environmental effects on the failure of GRP multi-bolt joints
Turvey, G.J., Wang, P. 08/2009 In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287. 13 p.
Journal article

Failure of pultruded GRP angle leg junctions in tension
Turvey, G., Wang, P. 27/07/2009
Conference paper

Buckling of CFRP stiffened GRP flanges
Amal Afifi 22/07/2008
Conference paper

Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G. 2/06/2008
Conference paper

A new fictitious time for the dynamic relaxation (DXDR) method
Kadkhodayan, A., Alamatian, J., Turvey, G.J. 7/05/2008 In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018. 23 p.
Journal article

Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G.J., Salehi, M. 2008 In: Thin-Walled Structures. 46, 7-9, p. 991-1002. 12 p.
Journal article

Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G., Wang, P. 8/07/2007
Conference paper

Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G., Salehi, M. 26/06/2007
Conference paper

Opening mode failure of pultruded GRP angle leg junctions
Turvey, G., Zhang, Y. 30/04/2007
Conference paper

Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.
Turvey, G., Wang, P. 1/02/2007 In: Composite Structures. 77, 4, p. 514-520. 7 p.
Journal article

A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G., Zhang, Y. 09/2006 In: Computers and Structures. 84, 22-23, p. 1527-1537. 11 p.
Journal article

Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G. 1/04/2006 In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75. 11 p.
Journal article

Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G., Zhang, Y. 02/2006 In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164. 13 p.
Journal article

An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G., Wang, P. 2006 In: Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Chapter

Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G. 2006 In: Proceedings of the 12th European conference on composite materials (ECCM-12).
Chapter

Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G., Wang, P. 2006 In: Proceedings of the 2nd international conference on joining plastics 2006..
Chapter

Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G.J., Zhang, Y. 1/02/2005 In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317. 9 p.
Journal article

An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.
Turvey, G.J. 2004 In: Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588. 11 p.
Chapter

Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G.J., Zhang, Y. 2004 In: Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7. 2 p.
Chapter

Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.
Turvey, G.J., Zhang, Y. 2004 In: Proceedings of the 7th international conference on computational structures technology. p. 57-58. 2 p.
Chapter

Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.
Turvey, G.J., Zhang, Y. 2004 In: Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92. 6 p.
Chapter

Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach.
Narita, Y., Turvey, G.J. 2004 In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 7, p. 681-691. 11 p.
Journal article

Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G.J., Wang, P. 2004 In: Proceedings of the 7th world pultrusion conference. p. 1-16. 16 p.
Chapter

Review of tests on bolted joints between pultruded GRP profiles.
Turvey, G.J., Cooper, C. 2004 In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233. 23 p.
Journal article

Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G.J., Zhang, Y. 2004 In: Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560. 8 p.
Chapter

Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G.J., Zhang, Y. 2004 In: Advanced composite Materials in bridges and structures. p. 99.
Chapter

Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G.J., Mulcahy, N. 2004 In: Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934. 8 p.
Chapter

Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G.J., Zhang, Y. 2004 In: Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864. 6 p.
Chapter

Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems.
Mottram, J.T., Turvey, G.J. 10/2003 In: Progress in Structural Engineering and Materials. 5, 4, p. 195-222. 28 p.
Journal article

Open-hole tension strength of pultruded GRP plate.
Turvey, G., Wang, P. 1/02/2003 In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101. 9 p.
Journal article

Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G.J., Salehi, M. 2003 In: Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90. 2 p.
Chapter

Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G.J., Zhang, Y. 2003 In: Proceedings of the DFC-7 conference on deformation and fracture of composites.
Chapter

Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity.
Turvey, G.J., Salehi, M. 11/2001 In: Computers and Structures. 79, 26-28, p. 2335-2348. 14 p.
Journal article

"Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".
Turvey, G.J. 2001 In: Proceedings of the ASCE sponsored workshop on composites in construction: a reality.
Chapter

Effects of temperature on the structural integrity of bolted joints in pultrusions.
Turvey, G.J., Wang, P. 2001 In: Composites in constructions. p. 171-176. 6 p.
Journal article

Elasto-plastic large deflection of uniformly loaded sector plates.
Turvey, G.J., Salehi, M. 2001 In: Proceedings of the 3rd international conference on thin-walled structures. p. 631-640. 10 p.
Chapter

Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles.
Turvey, G.J. 2001 In: Composites in constructions. p. 803-808. 6 p.
Journal article

Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.
Turvey, G.J., Wang, P. 2001 In: Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23. 4 p.
Chapter

Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.
Turvey, G.J., Mulcahy, N., Widden, M.B. 12/2000 In: Composite Structures. 50, 4, p. 391-403. 13 p.
Journal article

Bolted connections in PFRP structures.
Turvey, G.J. 2000 In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156. 11 p.
Journal article

Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G.J. 2000 In: Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Chapter

Semi-rigid column base connections in pultruded GRP frame structures.
Turvey, G.J., Cooper, C. 2000 In: Computers and Structures. 76, 1-3, p. 77-88. 12 p.
Journal article

Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G.J., Osman, M.Y. 2000 In: Proceedings of the 5th international conference on computational structures technology. Leuven
Chapter

Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G.J., Osman, M.Y. 2000 In: Computational steel structures technology. Edinburgh : Civil-Comp press p. 49-59. 11 p. ISBN: 0-948749-72-5.
Chapter

Flexure of pultruded GRP beams with semi-rigid end connections.
Turvey, G.J. 12/1999 In: Composite Structures. 47, 1, p. 571-580. 10 p.
Journal article

Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G.J. 1999 In: Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA p. 1-8. 8 p. ISBN: 978-1-85957-199-6.
Chapter

Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G.J. 1999 In: Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege p. 547-556. 10 p.
Chapter

Elastic large deflection analysis of stiffened annular sector plates.
Turvey, G.J., Salehi, M. 1998 In: International Journal of Mechanical Sciences. 40, 1, p. 51-70. 20 p.
Journal article

Frame connections.
Turvey, G.J. 1998 In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Brussels/Luxembourg : European Commission p. 27-49. 23 p.
Chapter

Plate-to-plate mechanical: part II: testing and applications.
Turvey, G.J. 1998 In: COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Brussels/Luxembourg : European Commission p. 15-26. 12 p.
Chapter

Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G.J. 1998 In: Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association p. 14.
Chapter

Semi-rigid behaviour of civil engineering structural connection.
Mottram, J.T., Turvey, G.J. 1998 In: COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg : European Commission p. 99-99. 1 p.
Chapter

Semi-rigid connection in pultruded GRP frame structures.
Turvey, G.J., Cooper, C. 1998 In: Mechanics of composite materials and structures. p. 151-166. 16 p.
Chapter

Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G.J., Cooper, C. 1998 In: Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona p. 221-235. 15 p.
Chapter

Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.
Turvey, G.J. 1998 In: Composite Structures. 42, 4, p. 341-351. 11 p.
Journal article

Torsion tests on pultruded GRP sheet.
Turvey, G.J. 1998 In: Composites Science and Technology. 58, 8, p. 1343-1351. 9 p.
Journal article

Uplift tests on column base connections in pultruded GRP frames.
Turvey, G.J., Cooper, C. 1998 In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292. 8 p.
Journal article

Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.
Turvey, G.J. 1997 In: Composite Structures. 38, 1, p. 3-16. 14 p.
Journal article

Circular plates with one diametral stiffener: an elastic large deflection analysis.
Turvey, G.J., Salehi, M. 1997 In: Computers and Structures. 63, 4, p. 775-783. 9 p.
Journal article

Full-section yield analysis of uniformly loaded sector plates.
Turvey, G.J., Salehi, M. 1997 In: Trends in structural mechanics: theory, practice and education. Dordrecht; London : Kluwer Academic p. 289-298. 10 p. ISBN: 0792346033.
Chapter

Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.
Turvey, G.J., Drinali, H. 1997 In: Computers and Structures. 63, 4, p. 769-773. 5 p.
Journal article

Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.
Turvey, G.J. 05/1996 In: Composite Structures. 35, 1, p. 33-47. 15 p.
Journal article

Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G.J., Cooper, C. 1996 In: Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal : Canadian Society for Civil Engineering p. 927-934. 8 p.
Chapter

Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.
Turvey, G.J., Osman, M.Y. 1996 In: Composites Part B: Engineering. 27, 5, p. 505-518. 14 p.
Journal article

Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G.J., Drinali, H. 1996 In: Advances in computational techniques for structural engineering. Edinburgh : Civil-Comp press 313 p. ISBN: 0948749458.
Chapter

Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G.J., Brooks, R.J. 1996 In: Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona p. 651-664. 14 p.
Chapter

Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.
Turvey, G.J. 1996 In: Composites Part B: Engineering. 27, 1, p. 35-42. 8 p.
Journal article

Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G.J., Cooper, C. 1996 In: ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Cambridge : Woodhead Publishing Limited p. 295-300. 6 p. ISBN: 1855733048..
Chapter

Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G.J. 1996 In: Structural design of polymer composites: EUROCOMP design code and handbook. London : E. and FN Spon p. 719-741. 23 p. ISBN: 0419194509..
Chapter

Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material.
Cooper, C., Turvey, G.J. 1995 In: Composite Structures. 32, 1-4, p. 217-226. 10 p.
Journal article

Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G.J., Salehi, M. 1995 In: Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Edinburgh : Civil-Comp press p. 243-253. 11 p.
Chapter

Lateral buckling of pultruded GRP I-section cantilevers
Brooks, R.J., Turvey, G.J. 1995 In: Composite Structures. 32, 1-4, p. 203-215. 13 p.
Journal article

Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G.J., Cooper, C. 1995 In: Proceedings of the 10th international conference on composite materials (ICCM-10). Vancouver : Woodhead Publishing Ltd. p. 621-628. 8 p.
Chapter

Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G.J. 1995 In: EUROCOMP design guide and background projects. London : Chapman and Hall
Chapter

Elastic small deflection analysis of annular sector mindlin plates.
Kobayashi, H., Turvey, G.J. 1994 In: International Journal of Mechanical Sciences. 36, 9, p. 811-827. 17 p.
Journal article

On bending of rhombic plates.
Kobayashi, H., Ishikawa, K., Turvey, G.J. 1994 In: Proceedings of the annual conference of Japanese society of civil engineers.
Chapter

Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G.J. 1992 In: Proceedings of the ECCM-composites testing and standardisation conference.
Chapter

Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G.J., Slater, R.C. 1992 In: First international conference on advanced composite materials in bridges and structures. Canada
Chapter