Dr Allan Rennie

Senior Lecturer

New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M., Ulmeanu, L., Doicin, C., Rennie, A.E.W., Lupeanu, E. 11/2017 In: Proceedings of the 30th International Business Information Management Association Conference. Madrid, Spain : International Business Information Management Association (IBIMA) p. 2611-2622. 12 p. ISBN: 9780986041990.
Conference contribution

Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering
Celik, H.K., Caglayan, N., Rennie, A.E.W. 10/2017 In: Journal of Food Process Engineering. 40, 5, 8 p.
Journal article

Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses
Caglayan, N., Celik, H.K., Rennie, A.E.W. 09/2017
Conference paper

Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering
King, B., Rennie, A.E.W., Bennett, G.R. 27/04/2017
Conference paper

Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication
Celik, H.K., Rennie, A.E.W., Er, K., Abram, T.N., Akinci, I. 27/04/2017
Conference paper

Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S.M.R., Rennie, A.E.W., Abram, T.N., Snape, M., Roberts, L. 27/04/2017
Conference paper

Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products
Celik, H.K., Rennie, A.E.W., Akinci, I. 03/2017 In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84. 10 p.
Journal article

Editorial: Rapid Design, Prototyping and Manufacturing
Bibb, R., Rennie, A.E.W. 01/2017 In: International Journal of Rapid Manufacturing. 6, 2-3, 2 p.
Editorial

Directing self-assembly to grow adaptive physical structures
Blaney, A., Dunn, N.S., Alexander, J.M., Richards, D., Rennie, A.E.W., Anwar, J. 2017 In: International Journal of Rapid Manufacturing. 6, 2-3, p. 114-133. 20 p.
Journal article

3D printed facial laser scans for the production of localised radiotherapy treatment masks
Briggs, M., Clements, H., Wynne, N., Rennie, A.E.W., Kellett, D. 31/10/2016 In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104. 6 p.
Journal article

Design and structural optimisation of a tractor mounted telescopic boom crane
Celik, H.K., Rennie, A.E.W., Akinci, I. 18/05/2016 In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 16 p.
Journal article

Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A.E.W., Burns, N., Geekie, L. 04/2016 In: Filtration. 16, 2, p. 97-102. 6 p.
Journal article

Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump
Cinar, R., Ucar, M., Celik, K., Firat, M.Z., Rennie, A. 04/2016 In: Experimental Techniques. 40, 2, p. 489-499. 11 p.
Journal article

Designing advanced filtration media through metal additive manufacturing
Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A.E.W. 03/2016 In: Chemical Engineering and Technology. 39, 3, p. 535-542. 8 p.
Journal article

Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference
Rennie, A.E.W., Bibb, R. 2016
Proceedings

Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation
Blaney, A., Alexander, J.M., Dunn, N.S., Richards, D.C., Rennie, A.E.W., Anwar, J. 12/2015 In: Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Loughborough : Lancaster University p. 49-57. 8 p. ISBN: 9781526203038.
Conference contribution

Multi-material additive manufacture of multi-layer ceramic capacitors
King, B.A.T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A.E.W., Dennison, K. 12/2015
Conference paper

Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A.E.W., Burns, N., Geekie, L. 12/2015
Conference paper

Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A.E.W., Burns, N., Geekie, L. 12/2015
Conference paper

Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts
Kaufman, J., Rennie, A.E.W., Clement, M. 30/09/2015 In: Procedia CIRP. 36, p. 223-229. 7 p.
Journal article

An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks
Dawson, R., Patel, A., Rennie, A., White, S. 07/2015 In: Journal of Applied Electrochemistry. 45, 7, p. 637-645. 9 p.
Journal article

Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12
Nelson, J.A., Rennie, A., Abram, T., Bennett, G.R., Adiele, A., Tripp, M., Wood, M., Galloway, G. 07/2015 In: Journal of Thermal Engineering. 1, 3, p. 159-165. 7 p.
Journal article

Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres
Celik, H.K., Rennie, A.E.W., Dawson, D., Eatough, A., Eatough, J., Akinci, I. 05/2015 In: Environmentally Friendly Agriculture and Forestry for Future Generations. St Petersburg, Russian Federation : Saint Petersburg State Agrarian University p. 172-183. 12 p. ISBN: 9785859832576.
Conference contribution

The lost crown of Horus
Kaufman, J., Rennie, A.E.W. 04/2015 Ancient Egypt, 15, p. 22-23. 2 p.
Article

Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A., Clement, M. 1/03/2015 In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p.
Journal article

Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials
Ulmeanu, M., Doicin, C., Baila, D., Rennie, A.E.W., Neagu, C., Laha, S. 03/2015 In: Revista de Materiale Plastice. 52, 3, p. 416-422. 7 p.
Journal article

Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A., Clement, M. 03/2015
Conference paper

Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis
Celik, K., Karayel, D., Lupeanu, M., Rennie, A.E.W., Akinci, I. 20/02/2015 In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710. 8 p.
Journal article

Designing advanced filtration media through metal additive manufacturing
Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. 02/2015
Conference paper

Horizon 2020 TWEETHER project for W-band high data rate wireless communications
Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M., Vilar, R. 2015 In: Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE 2 p.
Paper

Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N., Geekie, L. 2015 In: Filtration. 15, 3, p. 174-180. 7 p.
Journal article

Additive manufacturing in assistive product design development
Sembiring, E., Rennie, A., Laha, S. 12/2014
Poster

Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N., Geekie, L. 12/2014
Poster

Touching history: 3D replica artifacts
Kaufman, J., Rennie, A. 12/2014 Ancient Egypt, 15, p. 32-33. 2 p.
Article

Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N., Geekie, L. 11/2014 In: The Filtration Society 50th Anniversary International Conference and Exhibition. The Filtration Society 10 p.
Conference contribution

Filtration efficiency gains by fabrication using additive manufacturing
Burns, N., Vijayakumar, B., Rennie, A., Geekie, L. 10/2014 In: Proceedings of the European Conference on Fluid-Particle Separation. 2 p.
Conference contribution

Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Travis, D., Battersby, P. 10/2014 In: Filtration. 14, 4, p. 217-222. 6 p.
Journal article

Maximising open area whilst retaining strength in novel metal additive manufactured filter media
Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H., Rennie, A. 10/2014
Abstract

The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks
Dawson, R., Patel, A., Rennie, A., White, S. 28/09/2014 In: Chemical Engineering Transactions. 41, p. 175-180. 6 p.
Journal article

Automated software for streamlining optimisation of resource planning for an additive manufacturing system
Lupeanu, M., Rosu, M., Doicin, C., Rennie, A., Neagu, C. 09/2014 In: Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.
Paper

Effects of scan direction and orientation on mechanical properties of laser sintered polyamide-12
Nelson, J.A., Galloway, G., Rennie, A., Abram, T., Bennett, G.R. 09/2014 In: International Journal of Advanced Design and Manufacturing Technology. 7, 3, p. 19-25. 7 p.
Journal article

Innovations in filtration through additive manufacturing: Paper: EP140165
Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. 09/2014
Conference paper

Improved filtration using additive manufacturing
Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D.P., Rennie, A. 07/2014
Conference paper

Design, innovation and a new age for filtration
Burns, N., Geekie, L., Travis, D., Burns, M., Rennie, A. 06/2014
Abstract

Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A., Clement, M. 06/2014 In: Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014). American Society of Mechanical Engineers (ASME) 8 p.
Paper

Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform
Lupeanu, M., Rennie, A., Rosu, M., Moagar-Poladian, G. 04/2014 In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162. 20 p.
Journal article

Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Neagu, C. 31/03/2014
Poster

The business model for the functional rapid manufacturing supply chain
Hasan, S., Rennie, A., Hasan, J. 01/2014 In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552. 17 p.
Journal article

How to keep it in for longer: innovation in the Critical Care Unit
Laha, S., Rennie, A. 6/11/2013
Other

Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D., Battersby, P. 6/11/2013
Conference paper

Novel filter designs that deliver filtration benefits produced by metal additive manufacturing
Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A., Weston, D.P. 10/2013 In: Proceedings of AFS 2013 Fall Conference. 13 p.
Paper

Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips
Celik, K., Lupeanu, M., Rennie, A., Neagu, C., Akinci, I. 10/2013 In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318. 14 p.
Journal article

Using additive manufacturing to build energy efficient filter supports
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D., Battersby, P. 10/2013
Conference paper

Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students
Lambert, C., Rennie, A. 09/2013 In: Proceedings of The 30th International Manufacturing Conference. Dublin, Ireland p. 473-482. 10 p.
Paper

Predicting limit draft force for a chisel tine using FEA based simulation
Celik, K., Rennie, A., Akinci, I. 09/2013 In: 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117. 6 p.
Paper

How additive manufacturing helps in reducing power consumption in pumps
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D., Battersby, P. 9/08/2013
Poster

The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications
Lupeanu, M., Rosu, M., Rennie, A., Neagu, C., Brooks, H. 06/2013 In: Advances in Production, Automation and Transportation Systems. Brasov, Romania : WSEAS Press p. 227-232. 6 p.
Chapter (peer-reviewed)

A new design concept for milling tools of spherical surfaces obtained by kinematic generation
Neagu, C., Lupeanu, M., Rennie, A. 1/05/2013 In: Applied Mathematical Modelling. 37, 9, p. 6119-6134. 16 p.
Journal article

Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions
Lupeanu, M., Brooks, H., Rennie, A., Hill, D. 2013 In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160. 20 p.
Journal article

Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology
Kaufman, J., Rennie, A. 18/12/2012
Poster

Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A., Burns, N. 18/12/2012
Poster

Functional analysis for the development of bio-medical products
Lupeanu, M., Neagu, C., Opran, C., Rennie, A. 10/2012
Conference paper

An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A., Buckley, A. 07/2012 In: Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Hershey, Penn. : IGI Global p. 73-90. 18 p.
Chapter (peer-reviewed)

Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410
Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C., Akinci, I. 07/2012 In: ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012). Nantes : American Society of Mechanical Engineers (ASME) 8 p.
Paper

Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method
Celik, K., Rennie, A., Akinci, I. 07/2012 In: International Conference of Agricultural Engineering (CIGR-AgEng 2012). 8 p. ISBN: 978-84-615-9928-8.
Conference contribution

Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum
Lupeanu, M., Brooks, H., Rennie, A., Hill, D., Neagu, C. 06/2012 In: 13th Rapid Design, Prototyping & Manufacturing Conference. High Wycombe : CRDM Ltd p. 45-53. 9 p.
Paper

Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C.E., Rennie, A. 06/2012
Proceedings

Stress analysis of a sample marine crane’s boom under static loading condition
Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H., Rennie, A. 06/2012 In: 5th International Mechanical Engineering Forum 2012. Prague, Czech Republic p. 246-256. 11 p.
Paper

Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study
Hambali, R.H., Rennie, A., McGovern, J. 03/2012 In: 2nd International Conference on Arts, Social Sciences & Technology. Penang, Malaysia 7 p. ISBN: 978-983-44499-1-9.
Conference contribution

Optimisation of Build Orientation for FDM Additive Manufactured Products
Hambali, R.H., Vaudelin, M., Rennie, A. 02/2012 In: International Conference on Applications and Design in Mechanical Engineering (ICADME 2012). Perlis, Malaysia : School of Mechatronic Engineering, UniMAP 5 p. ISBN: 978-967-5760-08-2.
Conference contribution

Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis
Smith, P., Lupeanu, M., Rennie, A. 2012 In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110. 15 p.
Journal article

Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis
Hambali, R.H., Smith, P., Rennie, A. 2012 In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281. 13 p.
Journal article

Automated variation in product design: Using visual basics.net programming language to generate product variation
Smith, P., Rennie, A. 11/2011 In: Proceedings of the RAPDASA 2011 Conference. 17 p.
Paper

Delivering Regional Eco-Innovation through Knowledge Exchange
Lambert, C., Rennie, A. 25/10/2011
Conference paper

Surface finishing techniques for SLM manufactured stainless steel 316L components
Morton, W., Green, S., Rennie, A., Abram, T. 10/2011 In: Innovative Developments in Virtual and Physical Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP p. 503-509. 7 p. ISBN: 978-0-415-68418-7.
Conference contribution

Variable fused deposition modelling: analysis of benefits, concept design and tool path generation
Brooks, H., Rennie, A., Abram, T., McGovern, J., Caron, F. 10/2011 In: Innovative Developments in Virtual and Physical Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP p. 511-517. 7 p. ISBN: 978-0-415-68418-7.
Conference contribution

Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve
Celik, K., Rennie, A., Karayel, D., Akinci, I. 09/2011 In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239. 9 p.
Journal article

Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve
Celik, H.K., Rennie, A., Karayel, D., Akinci, I. 09/2011
Conference paper

Opportunities offered by additive manufacturing in creative businesses: informing designers
Anthony, R., Evans, M., Rennie, A., Kirby, E. 09/2011 In: 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628. 6 p.
Chapter (peer-reviewed)

Geometry Optimisation of Tools used in Milling of Spherical Surfaces
Neagu, C., Lupeanu, M., Rennie, A. 07/2011 In: SIM2011 - Sustainable Intelligent Manufacturing . Leiria, Portugal p. 87-94. 8 p.
Paper

Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools
Celik, K., Rennie, A., Topakci, M., Akinci, I. 07/2011 In: Proceedings of the XXXIV CIOSTA CIGR V Conference 2011. 9 p.
Conference contribution

A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture
Widden, M., Rennie, A., Quayle, S., Gunn, K. 23/06/2011 In: Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark p. 1039-1048. 10 p.
Paper

Additive manufacturing technologies and functional analysis used in product development optimization
Lupeanu, M., Rennie, A., Neagu, C. 06/2011 In: Rapid Design, Prototyping and Manufacturing. CRDM Ltd p. 105-112. 8 p. ISBN: 978-0-9566643-1-0.
Conference contribution

Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips
Celik, H.K., Hambali, R.H., Rennie, A., Akinci, I. 06/2011 In: Rapid Design Prototyping and Manufacturing. CRDM Ltd p. 155-162. 8 p. ISBN: 978-0-9566643-1-0.
Conference contribution

Optimisation of build orientation for FDM additive manufactured products
Hambali, R.H., Vaudelin, M., Rennie, A. 06/2011
Poster

Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs
Kaufman, J., Rennie, A., Quayle, S. 06/2011 In: Rapid Design, Prototyping and Manufacturing. CRDM Ltd p. 135-143. 9 p. ISBN: 978-0-9566643-1-0.
Conference contribution

Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A., Bocking, C.E. 06/2011 CRDM Ltd. 203 p. ISBN: 978-0-9566643-1-0.
Book

Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Eggbeer, D., Neagu, C. 06/2011 In: Rapid Design, Prototyping and Manufacturing. CRDM Ltd p. 173-181. 9 p. ISBN: 978-0-9566643-1-0.
Conference contribution

Variable Fused Deposition Modelling – Concept Design and Tool Path Generation
Brooks, H., Rennie, A., Abram, T., McGovern, J., Caron, F. 06/2011 In: Rapid Design, Prototyping and Manufacturing. p. 113-122. 10 p. ISBN: 978-0-9566643-1-0.
Conference contribution

Deformation behaviour simulation of an apple under drop case by finite element method
Celik, H.K., Rennie, A., Akinci, I. 05/2011 In: Journal of Food Engineering. 104, 2, p. 293-298. 6 p.
Journal article

An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A., Buckley, A. 04/2011 In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18. 18 p.
Journal article

Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment
Celik, K., Karayel, D., Caglayan, N., Rennie, A., Akinci, I. 03/2011 In: Virtual and Physical Prototyping. 6, 1, p. 47-56. 10 p.
Journal article

Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C., Celik, K. 2011 In: 16th European Forum on Rapid Prototyping and Manufacturing. 14 p.
Paper

Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems
Green, S., OMeara, N., Rennie, A. 2011
Conference paper

Computer aided material selection for additive manufacturing materials
Smith, P., Rennie, A. 12/2010 In: Virtual and Physical Prototyping. 5, 4, p. 209-213. 5 p.
Journal article

Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D., Jacobson, D. 12/2010 In: Virtual and Physical Prototyping. 5, 4, 1 p.
Editorial

Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine
Celik, H.K., Topakci, M., Canakci, M., Rennie, A., Akinci, I. 12/11/2010 In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446. 8 p.
Journal article

Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA
Hambali, R.H., Celik, K., Smith, P., Rennie, A., Ucar, M. 09/2010 In: International Conference on Design and Concurrent Engineering (iDECON 2010). Penerbit Universiti (UTeM) p. 224-228. 5 p. ISBN: 983-2948-84-1.
Conference contribution

Skills development of employees at SMEs in the construction sector in the North of England
Ganah, A., Rennie, A. 09/2010 In: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010). Royal Institution of Chartered Surveyors (RICS) 10 p. ISBN: 978-1-84219-619-9.
Conference contribution

Structural optimisation of a subsoiler
Topakci, M., Celik, H.K., Canakci, M., Karayel, D., Rennie, A. 09/2010 In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287. 7 p.
Journal article

Use of FDM in an undergraduate student project: design, build and test a model wind turbine
Widden, M., Gunn, K., Rennie, A. 09/2010 In: 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International 2 p.
Chapter (peer-reviewed)

Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry
Lambert, C., Rennie, A. 1/07/2010 In: Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010). p. 485-493. 9 p. ISBN: ISSN: 2009 3225 .
Conference contribution

A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050
Appleby, M., Lambert, C., Rennie, A., Buckley, A. 07/2010 In: Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASME 9 p. ISBN: 978-0-7918-3877-8.
Conference contribution

Using additive manufacturing effectively: a CAD tool to support decision making
Smith, P., Rennie, A. 07/2010 In: 36th International MATADOR Conference. Springer-Verlag p. 381-384. 4 p. ISBN: 978-1-84996-431-9.
Conference contribution

Analysis of existing Additive manufacturing material selectors
Hambali, R.H., Rennie, A. 06/2010
Conference paper

Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials
Smith, P., Rennie, A. 06/2010 In: 11th National Conference on Rapid Design, Prototyping and Manufacturing. High Wycombe : CRDM Ltd p. 55-61. 7 p. ISBN: 978-0-9566643-0-3.
Conference contribution

Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter
Celik, K., Karayel, D., Caglayan, N., Rennie, A., Akinci, I. 06/2010 In: 11th National Conference on Rapid Design, Prototyping and Manufacturing. High Wycombe : CRDM Ltd p. 181-191. 11 p.
Chapter (peer-reviewed)

Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine
Topakci, M., Celik, H.K., Canakci, M., Rennie, A., Akinci, I., Karayel, D. 04/2010 In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536. 6 p.
Journal article

Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D., Rennie, A., Bocking, C.E. 2010 CRDM Ltd. 222 p. ISBN: 978-0-9566643-0-3.
Book

A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050
Appleby, M., Lambert, C., Rennie, A. 12/2009
Poster

Rapid manufacturing complex geometries for high-power microwave applications
Seviour, R., Rennie, A., Celik, H.K. 12/2009
Conference paper

A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)
Smith, P., Rennie, A. 10/2009 In: 4th International Conference on Advanced Research in Virtual and Rapid Prototyping. Leiria, Portugal : Taylor & Francis Group p. 95-100. 6 p.
Paper

Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components
Celik, H.K., Tan, Y., Seviour, R., Rennie, A. 09/2009 In: US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88. 6 p. ISBN: 9789944629201.
Conference contribution

Barriers to training for employees at SMEs in the construction sector
Ganah, A., Rennie, A. 07/2009 In: The First TG 59 International People in Construction Conference. p. 138-146. 9 p. ISBN: 978-0-620-44309-8.
Conference contribution

Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design
Smith, P., Rennie, A. 06/2009 In: Rapid Design, Prototyping and Manufacturing. High Wycombe : MJA Print p. 17-25. 9 p.
Paper

A review of suitable methods for producing automated or semi automated product designs for production using RM technologies
Rennie, A., Smith, P. 2009 In: 14th European Forum on Rapid Prototyping and Manufacturing. 7 p.
Conference contribution

Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A., Bocking, C.E., Jacobson, D. 2009 MJA Print. 123 p. ISBN: 978-0-948314-57-5.
Book

Rapid Manufacturing Design Tools
Smith, P., Rennie, A. 12/2008
Poster

A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S., Rennie, A. 10/2008 In: 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna : DAAAM International p. 591-592. 2 p.
Paper

Consultancy and Support: Computer Aided Design & Engineering: (incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report
Rennie, A. 10/2008 N/A. 129 p.
Commissioned report

Comparing Carbon Footprint Methodologies for SMEs
Moss, J., Lambert, C., Rennie, A. 08/2008
Abstract

Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products
Smith, P., Rennie, A. 08/2008 In: Solid Freeform Fabrication Symposium 2008. University of Texas at Austin p. 507-518. 12 p.
Chapter (peer-reviewed)

Templates for consumer use in designing customised products
Ariadi, Y., Rennie, A. 08/2008 In: Solid Freeform Fabrication Symposium 2008. University of Texas at Austin p. 450-458. 9 p.
Chapter (peer-reviewed)

The application of rapid manufacturing technologies in the spare parts industry
Hasan, S., Rennie, A. 08/2008 In: Sild Freeform Fabrication Symposium 2008. University of Texas at Austin p. 584-590. 7 p.
Chapter (peer-reviewed)

The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques
Wrigley, S., Lambert, C., Rennie, A. 08/2008
Abstract

Design templates for consumer use in customising additive layer manufactured products
Ariadi, Y., Rennie, A. 06/2008 In: 9th National Conference on Rapid Design, Prototyping and Manufacturing. Beaconsfield : MJA Print p. 137-144. 8 p.
Chapter (peer-reviewed)

Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications
Smith, P., Rennie, A. 06/2008 In: 9th National Conference on Rapid Design, Prototyping and Manufacturing. Beaconsfield : MJA Print p. 69-79. 11 p.
Chapter (peer-reviewed)

Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution
Ariadi, Y., Hasan, S., Smith, P., Rennie, A. 06/2008 In: Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84. 6 p.
Conference contribution

Encouraging Environmental Responsibility in Small Businesses
Moss, J., Lambert, C., Rennie, A. 06/2008
Poster

SME application of LCA-based carbon footprints
Moss, J., Lambert, C., Rennie, A. 06/2008 In: International Journal of Sustainable Engineering. 1, 2, p. 132-141. 10 p.
Journal article

The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs
wrigley, S., Lambert, C., Rennie, A. 06/2008
Poster

Virtual Trading System for Rapid Manufactured Products
Hasan, S., Rennie, A. 06/2008 In: 9th National Conference on Rapid Design, Prototyping and Manufacturing. Beaconsfield : MJA Print p. 127-135. 9 p.
Chapter (peer-reviewed)

Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A., Jacobson, D., Bocking, C.E. 2008 MJA Print. 173 p. ISBN: 978-0-948314-55-1.
Book

The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services
Lambert, C., Rennie, A., Williams, D. 2008 , 10 p.
Working paper

Rapid Manufacturing Design Scenarios
Smith, P., Rennie, A. 12/2007
Poster

Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes
Lambert, C., Rennie, A., Baker, N., Hjelm, O. 7/11/2007
Abstract

A transnational approach to the implementation of eco-design methodologies in SMEs
Rennie, A., Lambert, C., Baker, N., Hjelm, O. 10/07/2007 In: The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development . ISBN: 1844020584, 9781844020584.
Conference contribution

Virtual Prototyping Phase III
Rennie, A. 01/2007 N/A. 54 p.
Commissioned report

Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach
Taylor, S., Rennie, A., McDonald, W. 2007 In: Virtual and Rapid Manufacturing. London : Taylor & Francis Group p. 811-816. 6 p.
Chapter (peer-reviewed)

Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator
Quayle, S., Rennie, A. 2007 In: International Journal of Agile Systems and Management. 2, 2, p. 222-236. 15 p.
Journal article

Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on
Jacobson, D., Bocking, C.E., Rennie, A. 2007 MJA Print. 140 p. ISBN: 9-780948314-537.
Book

Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)
Rennie, A.E.W. 15/11/2006 In: Proceedings of the 4th EU Best Practice Conference.
Conference contribution

Virtual Prototyping Phase II
Rennie, A. 05/2006 N/A. 37 p.
Commissioned report

Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C.E., Rennie, A.E.W., Jacobson, D.M.J. 2006 MJA Print. 134 p. ISBN: 0-948314-494.
Book

Virtual Prototyping
Rennie, A. 07/2005 N/A. 77 p.
Commissioned report

From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent
Taylor, S.M., Rennie, A.E.W., Quayle, S., Rawcliffe, N. 10/06/2005 In: Rapid Design, Prototyping and Manufacture. X-CD Technologies Inc p. 101-107. 7 p.
Chapter (peer-reviewed)

Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A., Jacobson, D., Bocking, C.E. 2005 X-CD Technologies Inc. 129 p. ISBN: 0-9737783-1-8.
Book

SME expectations and experiences
Seward, D., Quayle, S., Rennie, A., Taylor, S. 2005
Speech

Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D., Rennie, A., Bocking, C.E. 2004 Professional Engineering Publishing. 111 p. ISBN: 1-86058-465-9.
Book

Electroforming for Injection Moulding
Rennie, A., Bocking, C. 20/06/2003 In: Rapid and Virtual Prototyping and Applications. Professional Engineering Publishing p. 239-248. ISBN: 186058411X 9781860584114.
Chapter

Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C.E., Rennie, A., Jacobson, D. 2003 Professional Engineering Publishing. 330 p. ISBN: 1-86058-411-X.
Book

Injection mould tool manufacture in less than five days
Jacobson, D., Bocking, C., Rennie, A.E.W. 1/06/2002
Other contribution

The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes
Rennie, A.E.W., Bennett, G., Bocking, C., Jacobson, D. 1/05/2002 In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96. 5 p.
Journal article

Injection Mould Tool Manufacture in Less Than Five Days
Jacobson, D., Bocking, C.E., Rennie, A. 03/2002 In: RAPRA Rapid Tooling Conference 2002. RAPRA p. 35-43. 9 p. ISBN: 978-1-85957-313-6.
Conference contribution

Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D., Rennie, A. 01/2002 In: Microelectronics International. 19, 1, p. 30-32. 3 p.
Journal article

Electroforming for Injection Moulding
Rennie, A.E.W., Bocking, C. 2002 In: State of the Art Report - RAPTIA European Thematic Network.
Journal article

Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A.E.W., Jacobson, D.M., Bocking, C. 2002 Professional Engineering Publishing. 173 p. ISBN: 1-86058-374-1.
Book

The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes
Bocking, C., Jacobson, D., Rennie, A., Bennett, G. 10/2001
Conference paper

An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts
Bocking, C., Jacobson, D., Rennie, A. 09/2001 In: Time Compression technologies Conference 2001. Rapid News Publications PLC 22 p.
Chapter (peer-reviewed)

Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D., Rennie, A. 06/2001 In: 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of. p. 412-415. 4 p.
Chapter (peer-reviewed)

Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes
Rennie, A.E.W., Bocking, C.E., Bennett, G.R. 19/03/2001 In: Journal of Materials Processing Technology. 110, 2, p. 186-196. 11 p.
Journal article

Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode
Bocking, C., Rennie, A., Bennett, G., Lewis, N. 10/2000 In: Time Compression Technologies 2000 Conference. Rapid News Publications PLC p. 151-156. 6 p.
Paper

Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C.E., Rennie, A., Bennett, G.R. 08/2000 In: 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin p. 469-477. 9 p.
Chapter (peer-reviewed)

Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode
Rennie, A., Bocking, C.E., Bennett, G.R. 07/2000 In: Proceedings of the 33rd International MATADOR Conference. Springer-Verlag p. 301-306. 6 p. ISBN: 1-85233-323-5.
Conference contribution

Surface Flatness Measurement in Stereolithography
Male, J.C., Rennie, A., Bennett, G.R. 06/2000 In: The Eighth International Conference on Rapid Prototyping. The University of Dayton p. 111-117. 7 p.
Chapter (peer-reviewed)

Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software
Rennie, A., Bennett, G.R. 2000 In: International Journal of Engineering Simulation. 1, 3, p. 24-30. 7 p.
Journal article

A system for the generation of liquid metal droplets using electromotive forces
Rennie, A., Bennett, G.R. 09/1997 In: Proceedings World Congress: Manufacturing Technology Towards 2000. James Cook University of North Queensland p. 501-510. 10 p.
Chapter (peer-reviewed)

Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry
Rennie, A., Bennett, G.R. 07/1997 In: Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403. 5 p. ISBN: 0-333-71655-8.
Conference contribution

The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools
Dover, S.J., Rennie, A., Bennett, G.R. 11/1996 In: Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd p. 187-199. 13 p.
Chapter (peer-reviewed)

Rapid prototyping using electrodeposition of copper
Dover, S.J., Rennie, A., Bennett, G.R. 08/1996 In: Solid Freeform Fabrication Symposium 1996. University of Texas at Austin p. 191-198. 8 p.
Chapter (peer-reviewed)