To Intall this program:

1) Use any characters for the licence number
2) Choose the Typical installlation option

After set up is complete:

1) Start the program from the start-menu
2) Look under help file for information about how to use 
    the program

A sub-folder called \examples contains three types of files:

a) A standards dbf file, xrdstd2.dbf, which contains the
   information on the calibration standards used
b) A refererence dbf file, xrdref2.dbf which contains
   information about the minerals used in the calibration dbf

-load the reference dbf first into the program followed 
by the standards dbf file.- These are in dbase III format

c) There are several examples of data files eg "*.qxd" files 
which contain actual data for measured samples-
 these should allow you to test out what the program does, 
and the data required.

You MAY wish to copy this info into a text file, for later use

IF Setup fails to install quant-xrd on the start menu do the following

1)click on start-settings- task-bar and select the start menu tab

2) Click on add and then browse

3) Navigate to the location in which the qntxrd.exe file is  found

by default this will be c:\program files\CEMP systems software\quant-xrd

-select the qntxrd.exe as the file, and select a quant-xrd as the name of the shortcut
all should now be well